Auto Relay FLS858J

Features:
● A set of bridge contact points
● 150A switching capability
● plastic sealed
● Outline dimensions: 33.5X52.4X65
● Working temperature as high as 75 °C
Contact Now
Auto Relay FLS858J

Specification

Contact Form 1 A One set of bridge
Maximum continuous 150A
Max.Operating Voltage 110VDC
Electrical durability 5×104times
Mechanical Durability 1×107times 300 times/minute
Insulation Resistance 20MΩ
Operate/Release 50ms or less
Release Time 50ms or less
Operating temperature -40℃~+75℃
Vibration 10Hz~500Hz,5.0G
Package mode Plastic seal

 

Contact parameter

Contact load voltage Load type Contact load voltage A On-off ratio Electrical durability Contact material Test environment temperature Contact wiring diagram
    bridging(1A) Turn on S Turn off S        
14VDC Resistive Turn on 150 1 4 5×104 Agsno2In2o3 23℃ see picture 1
    Turn off 150 1 4 5×104 Agsno2In2o3 23℃ see picture 1
28VDC Resistive Turn on 100 1 4 5×104 Agsno2In2o3 23℃ see picture 1
    Turn off 100 1 4 5×104 Agsno2In2o3 23℃ see picture 1
72VDC Resistive Turn on 50 1 4 5×104 Agsno2In2o3 23℃ see picture 1
    Turn off 50 1 4 5×104 Agsno2In2o3 23℃ see picture 1
110VDC Resistive Turn on 30 1 4 5×104 Agsno2In2o3 23℃ see picture 1
    Turn off 30 1 4 5×104 Agsno2In2o3 23℃ see picture 1

 

Coil Ratings

Standard Normal voltage (VDC) Pick-up voltage (VDC) Drop-out voltage (VDC) Coil resistace  (Q±10%) Parallel resistance (Q±5%) Equivalent  resistance (Q±10%) Power consumption (W) Max.allowable overdrive voltage1) (VDC)
20 °C 85 °C
12 8.4 1.2 90 - - 1.6 20.2 15.7
12 8.4 1.2 80 680 79.5 1.8 20.2 15.7
24 16.8 2.4 360 - - 1.6 40.5 31.5
24 16.8 2.4 320 2700 317.6 1.8 40.5 31.5

 

ORDERING  GUIDE

 

EXTERNAL DIMENSIONS

Remark:

(1)In case of no tolerance shown in outline dimension: outline dimension≤1mm, tolerance should be ±0.2mm;

Outline dimension>1mm and≤5mm, tolerance should be ±0.3mm; outline dimension>5mm, 

tolerance should be ±0.4mm.

Feedback